stdClass Object
(
    [id] => 15446
    [paper_index] => 202503-02-020686
    [title] => DESIGN, FABRICATION AND ANALYSIS OF TUMBLING MACHINE
    [description] => 
    [author] => Jay Navale, Hrutik Faujdar, Rahul Kadam, Waibaitulla Sheik
    [googlescholar] => 
    [doi] => 
    [year] => 2025
    [month] => March
    [volume] => 10
    [issue] => 3
    [file] => fm/jpanel/upload/2025/April/202503-02-020686.pdf
    [abstract] =>  The paper presents an analysis of the applicability of tumbling machining for smoothing sharp edges and deburring. The basic conditions for the formation of burrs in machining and shapes of burrs on the edges of objects machined, at the exit of the tool have been defined. Possible ways of removing burrs are quoted. The results of research of deburring and smoothing, rounding sharp edges using tumbling machining are presented. To illustrate the surface taper ratio and edge the optical microscope Nikon Eclipse MA 200 with the image analysis system NIS 4.20 was used. The effect of treatment time on the final effect of removing burrs from aluminium tube after cutting with band saw was defined. Vibro-abrasive machining operators are exposed to loud occupational noises when loading and unloading the metal products in vibro-abrasive machining. The increase in the number of hearing loss injuries in the metal stamping industry initiated OSHA’s Special Emphasis Programs in designated industries and locations across the United States. Because occupational hearing loss injuries do not manifest themselves until years later, it is critical that employers install engineering controls immediately in order to protect worker’s hearing and prevent hearing loss injuries.
    [keywords] => Fine Machining, Tumbling Machine, Tumbling, Finishing Process, Abrasives


    [doj] => 2025-04-01
    [hit] => 
    [status] => 
    [award_status] => P
    [orderr] => 48
    [journal_id] => 2
    [googlesearch_link] => 
    [edit_on] => 
    [is_status] => 1
    [journalname] => EPRA International Journal of Research & Development (IJRD)
    [short_code] => IJSR
    [eissn] =>  2455-7838 (Online)
    [pissn] => - -
    [home_page_wrapper] => images/products_image/2-n.png
)
Error fetching PDF file.