raja slot
raja slot
slot deposit pulsa tanpa potongan
slot gacor 2024
raja slot
raja slot
raja slot
R.Manjunathan , R.Raghunathan, D.Sundarraj, P.Satheeshkumar
Student, Vel Tech High Tech Engineering College
Abstract
Temperature at tool-chip interface of a single point cutting tool is determined, generated in different speed machining operations.Specifically, three different analyses are comparing to an experimental measurement of temperature in a machining process at slow speed,medium speed and at high speed. In addition, three analyses are done of a High Speed Steel and of a Carbide Tip Tool machining process at three different cutting speeds, in order to compare to experimental resultsproduced as part of this study. An investigation of heat generation in cutting tool is performed by varying cutting parameters at the suitable cutting tool geometry. The experimental results reveal that the mainfactors responsible for increasing cutting temperature are cutting speed (v) and depth of cut (d) respectively. Various researches have been undertaken in measuring the temperatures generated during cutting operations. Investigators made attempt to measure these cutting temperatures with various techniques during machining.
Keywords: Single Point Cutting Tool, HSS tool and Carbide tip tool, Centre lathe,Fluke IR Thermal Imager, Finite Element Analysis, Solid Modelling
Journal Name :
EPRA International Journal of Multidisciplinary Research (IJMR)

VIEW PDF
Published on : 2022-02-14

Vol : 8
Issue : 2
Month : February
Year : 2022
Copyright © 2024 EPRA JOURNALS. All rights reserved
Developed by Peace Soft raja slot